Foutcodes Beko inductie

Betreft kookplaat met geintegreerde afzuiging.

E1 Communication
Error Btw
MainBoard-
Display
It is a communication error between the motherboard and the display.
Check/change the communication cable between motherboard and
display.
If the problem persists, replace both Motherboards/Displays.
E2 Communication
Error Btw
Display-Display
It is a communication error between Display-Display.
Check/replace communication cable between displays.
If the problem is not resolved, replace both displays/on-off displays.
E3
Communication
Error Btw
MainBoard-
MainBoard
Check the communication cables and sockets between the two
motherboards. If the problem persists, replace both motherboards.
E4
Communication
Error Btw
MCU’s in
Display Board Change the display.
E5
Communication
Error Btw
MCU’s in
MainBoard Replace motherboards.
E6
Communication
Error Btw
Boiling Sensor –
Display
Check the boiler sensor communication cable and socket. If the
problem persists, replace the boiling sensor board.
E7
Communication
Error Btw
CookSensor-
CookSensor
Master Card
Check the Cooksensor group communication cables and sockets. If the
problem persists, replace the Cooksensor master board.
E8
Communication
Error Btw
CookSensor
Master Card –
Display
Check the cooksensor master card cable and socket. If the problem
persists, replace the cooksensor master board. If the problem persists,
replace the display.
E9
Communication
Error Btw
BEMOD –
Display
Check the BEMOD cable and socket. If the problem persists, replace the
card.
E10 Communication
Error Btw
Check the WEMOD cable and socket. If the problem persists, replace
the car

E11
Communication
Error Btw SAFIR

• Display
  Check the SAFİR cable and socket. If the problem persists, replace the
  card.
  E12 Reserved
  E13 Reserved
  E14 Reserved
  E15 Reserved
  E16
  COIL NTC OPEN
  Check coil ntc cables and sockets. If the problem persists, replace the
  coil. If the problem persists, replace the relevant motherboard.
  E17 COIL NTC
  SHORT
  Check coil ntc cables and sockets. If the problem persists, replace the
  coil. If the problem persists, replace the relevant motherboard.
  E18 HEATSINK NTC
  OPEN Replace the corresponding motherboard.
  E19 HEATSINK NTC
  SHORT Replace the corresponding motherboard.
  E20 Constant Coil
  NTC
  Turn off the product with the on/off button. Wait for it to cool. If the
  problem persists, replace the relevant coil. If the problem persists,
  replace the motherboard.
  E21
  Empty Pot –
  Regarding to
  coil NTC Turn the product off with the on/off button and wait for it to cool.
  E22 Coil OverTemp Turn the product off with the on/off button and wait for it to cool.
  E23 Class-B MCU
  Mainboard Replace the corresponding motherboard.
  E24
  Class-B MCU
  Touch Board
  included on/off
  button Change the display.
  E25 Fan RPM
  Problem
  Check the cable and socket of the relevant fan. If the problem is not
  fixed, the fan. If the problem is fixed, pass the clock.
  E26 Heatsink Over
  Temp Turn the product off with the on/off button and wait for it to cool.
  E27 Reserved
  E28 Reserved
  E29 Reserved
  E30 Reserved
  E31 Over Voltage
  SMPS Input
  Check the mains voltage. If the problem persists, replace the SMPS
  card

E32 Over Current Turn the product on/off with the on/off button. If the problem persists,
replace the SMPS card.
E33 Low Voltage
SMPS Input
Check the mains voltage. If the problem persists, replace the SMPS
card.
E34 Low Voltage for
IG Board
Replace the corresponding motherboard. If the problem persists,
replace the SMPS card.
E35 Low Voltage for
Touch Board
Check the communication cable and socket between the motherboard
and the display. If the problem persists, replace the motherboard. If the
problem persists, replace the display.
E36 Zerocross lost
Check the mains voltage. If the problem is not resolved, check the
communication cables between the SMPS and the motherboard. If the
problem persists, replace the motherboard. If the problem persists,
replace the SMPS card.
E37 Wrong
Frequency
Turn the product on and off with the on/off button. Check the mains
frequency.
E38
General
Hardware
MainBoard
Error
Replace the corresponding motherboard. If the problem persists,
replace the other motherboard.
E39 General Filter
Board Error Replace the SMPS card.
E40 Reserved
E41 Reserved
E42 Reserved
E43 Reserved
E44 Reserved
E45 Reserved
E46 Long press over
10sec
Turn the product off and on with the on/off button. If the problem is
not resolved, clean the touch area and remove foreign objects from the
area.
E47 Bad Pot Use an induction compatible pot.
E48
Not Suitable
Situation for
Boiling sensor
Turn the product on and off with the on/off button. If the problem
persists, replace the card.
E49
Not Suitable
Situation for
Cook sensor
Turn the product on and off with the on/off button. If the problem
persists, replace the card.
E50 Max
WorkingTime
Turn the product off and on with the on/off button. If the problem is
not resolved, turn the power off and on.
E51
Sensor
Calibration
Error
Turn the product on and off with the on/off button. If the problem
persists, replace the card

E52 Display Board
OverTemp
Turn the product on and off using the on/off button, wait for the
product to cool. If the problem persists, replace the card.
E53 Boiling Board
OverTemp
Turn the product on and off with the on/off button. If the problem
persists, replace the card.
E54
CookSensor
MasterCard
OverTemp
Turn the product on and off with the on/off button. If the problem
persists, replace the card.
E55 WEMOD
OverTemp
Turn the product on and off with the on/off button. If the problem
persists, replace the card.
E56 BEMOD
OverTemp
Turn the product on and off with the on/off button. If the problem
persists, replace the card.
E57 SAFIR
OverTemp
Turn the product on and off with the on/off button. If the problem
persists, replace the card.
E58 CookSensor
NTC Error
Turn the product on and off using the on/off button, wait for the
product to cool. If the problem is not resolved, check the sensor group
cable and connector, replace the board.
E59 CookSensor IR
Error
Turn the product on and off using the on/off button, wait for the
product to cool. If the problem is not resolved, check the sensor group
cable and connector, replace the board.
E60
Cooksensor
OverTemp
Error
E61 Cooksensor
BadPot Error
E62 Cooksensor / UI
Comm Error
Turn the product on and off with the on/off button. If the problem is
not resolved, check the sensor group cable and socket, replace the
cookmaster board. If the problem persists, replace the display